Clock made of wood board,LEDs, motor and Rduino code.

 

The output devises are going to be LEDs and Motors.


Application making a clock

Here is a link to dxf of the object under consideration: DXF LINK in text format

 

1

3d digital model of the clock


The clock is structurally made of 27cm long, 16cm wide and 2cm thick wood material. The clock has twelve LEDs that will blink at every hour of the day and a minute arm that will rotate 30 deg per hour.  On the main wood board holes are made to place the LEDs and pass wires and also to place the motor that will be rotating the minute arm. The board is also articulate with reliefs of stripes showing the hours in array of twelve each separated by thirty degrees.
The clock is run by an Ardinho code written for both the digital output LEDs ( making the LEDs blink one at a time at every hour)  and analog output motor( making the motor rotate at a such a speed where it will make the minute arm rotate thirty degrees per hour).

2 3

4